Go Back
The professional cutting machine in house connection

MICROautomatic plus

The powerful and air-powered cutting motor enables the removal of deposits, ingrowths or similar. In addition, the cutter guarantees the reopening of lateral connections after liner rehabilitation. Equipped with a sturdy 50 m or 70 m supply hose, you can reach even remote locations in the house connection line. The excellent bendability, the axial feed of 100 mm and the climbing and creeping function also prove to be very useful functions. The colour camera with LED illumination can be cleaned with permanent air or connectable water to ensure a clear view of the cutting site at all times. The MICROautomatic plus is available with cable remote control unit or removable control unit with 2 joysticks in protective case.
Picture of the milling drive with inflated radial bubble and Kardiam Diamantwerkzeuge GmbH milling head.

Technical Data

Measurements

Cable drum size: L 790 x W 630 x H 1050 mm / L 31.1 x W 24.8 x H 41.34 inches.

Nominal Diameter

Usable in pipes from DN 80 to DN 250 (inner diameter)

Weight

Weight cable drum: approximately 71 kg / 156.53 pounds with 50 m / 164.04 feet supply hose length, approximately 78 kg / 172.04 pounds with 70 m / 229.66 feet supply hose length

External Diameter Mill

72 mm / 2.83 inches

Components

Cutter module, cable drum and control unit

Milling Drive

Air-powered cutting motor

Camera

Colour camera with LED illumination

Camera cleaning with permanent air and connectable water (water equipment)

Cable Length / Cable Drum

50 m / 164.04 feet or 70 m / 229.66 feet supply hose on cable drum

Cable drum with pneumatic and electrical rotary transmission and manual brake

Control

Removable control unit with 2 joysticks in protective case and tablet

10.1 inch tablet with multi-touch display

IMS video software for recording and playback of video signals

Features / Special Features

90° flexibility in pipe bends from DN 100 (stoneware pipes, lined pipes without folds or similar)

Approx. 100 mm axial feed, manual and automatic creeping and climbing function (endless and single cycle)

Approx. 90° swivel movement cutting head

400° rotation and approx. 90° swivel movement with stops

Accessories case

Additional Purchase Options

5 m / 16.4 ft and 10 m / 32.8 ft extension cable for control unit

Extensions to DN 200 and DN 250

Cable remote control with 3.5 inch monitor (exchangeable for control unit with 2 joysticks in protective case/tablet)

Vehicle installation set